How to adjust my Philips Baristina Espresso Machine’s drink volume

If you would like to personalize the amount of coffee your Philips Baristina Espresso Machine makes, find how to program the coffee quantity to your liking in the article and video below.

Programming the drink volume
 

1. Fill the water container with fresh water.
    

2. Place a cup on the drip tray.
    

3. Insert the empty portafilter.
    

4. Press and hold the button of the recipe that you want to change for five seconds until the button starts blinking intermittently.
    

5. Move the portafilter firmly to the right until you hear a “click”. The machine will start grinding the coffee beans for the selected beverage into the portafilter.
    

6. The portafilter will then move back into position, and the machine will automatically start brewing the selected beverage.
    

7. When the cup contains the desired quantity of coffee, press the blinking button (the button that you are programming) again. The selected button will blink in a short burst to confirm that the new volume has been programmed.
    

8. The machine will be ready when the LED stops blinking. Remove the cup and enjoy your coffee with the adjusted volume.
    

To find the range you can program, see the image below.

Reset the drink volumes to factory settings
 

Press and hold the Espresso, Lungo, and Intensity Boost buttons simultaneously for five seconds until all buttons flash to indicate that the machine has been reset to factory settings.